Simons Plutone – Boiler / Iron unit

Have Questions? Enquiry about this product below:

Please wait...

Two Iron Boiler Unit. Continuous Operation.

Technical Data:
  • Electrical Power: 240V / 50Hz
  • Total Power: 5120W
  • Iron Power: 960W Each.
  • Boiler Power: 3200W
  • Pump Power: 48W
  • Boiler Capacity: 5 Litres
  • Operating Pressure: 3.5 Bar
  • Weight: 25Kg

Made in Italy

BASIC GUIDELINES: SIMONS PLUTONE 2 IRON CONTINUOUS OPERATION

STEAM BOILER UNIT

 

BOILER CAPACITY

 

 

5 litres clean tap water (warm to hot should be used). Check level using view panel at front of unit. Make sure there is always water in the tank.

 

 

WARM UP TIME

 

 

Approx. 10 minutes – 15 minutes

RUN TIME  

5 to 6 hours

 

 

RECOMMENDED

 

 

IT IS RECOMMENDED THE UNIT IS CHECKED AND REFILLED AS REQUIRED

 

 

INCLUDED ACCESSORIES:

 

Mobile stand, tank, mat & cable springs.

 

  1. To refill. Turn boiler switch off and turn off at power socket.. Drain all the steam via the iron microswitch (steam button). Replace filler cap, plug in power supply and switch on.
    Fill 10 litre plastic bottle and restart.
  1. Normal usage. For dry ironing it is possible to adjust the thermostat on different positions accordin to the type of fabric (check garment label). For steam ironing you should adjust thermostat on ”cotton-linel” position. A Teflon shoe is available as an accessory for delicate synthetics and woollens.
  2. Maintenance. The unit needs weekly cleaning to remove dirty water deposits. When hot, unplug from power point, fill boiler with fresh water, drain into the plastic container. Repeat with warm water two to three times until most deposits have been removed.
  3. Power Requirement. 240v plus Neutral.

It is recommended this info sheet is kept near the unit as a quick reference guide for the operator.